It is possible to insert image data onto drawings.
This is convenient for inserting logo data and inserting images for tracing.

The following are the types of data that can be inserted.

BMP files (*.bmp)
JPEG files (*.jpg; *.jpeg)
PNG files (*.png)
GIF files (*.gif)
TIFF files (*.tiff; *.tif)

 

The following will explain each operation for inserting images.

Selecting the Insert Image Menu
Inserting an Image
Rotating an Image
Mirroring an Image
Exiting Insert Image Mode

 

Selecting the Insert Image Menu

Select [Draw] => [Insert Image]

There are several other ways to perform this. Refer to About Executing Menus.

 

---

Inserting an Image

After selecting the Insert Image Menu,

STEP 1: Select an image
STEP 2: Click the location where you want to place it

 

Inserting an Image

The following will explain how to insert an image.

-1 Click [Draw] => [Insert Image]. => The "Open" dialog will appear.

-2 Select an image file. -3 Click "OK".

-4 Click the location on the schematic where you want to place it.

 

---

Rotating an Image

While inserting the image, it rotates 90 degrees.
There are the following methods for rotating.

Method 1: [Right Click] => Select [Move/Rotate/Mirror] => [Rotate]
Method 2: [Keyboard] => Press [R]

Rotate Example

Before Rotate	After Rotate

Rotation is 90 degrees to the left. There is also a Reverse Clockwise Menu.

 

---

Mirroring an Image

While inserting an image, it is mirrored.
There are the following methods for mirroring.

Method 1: [Right Click] => Select [Move/Rotate/Mirror] => [Mirror]
Method 2: [Keyboard] => Press [M]

Mirror Example

Before Mirroring	After Mirroring

"Mirror" is Left-Right mirroring. There is also a Flip Vertically Menu.

 

Exiting Insert Image Mode

The following is the operation for exiting Insert Image mode.

Right click, Select => [Cancel]
* Press "Escape" on the keyboard